European quality     Fast delivery     Market prices

MARSTON ANAEROBIC SCREW RETENTION

A super-fast anaerobic liquid plastic which cures on contact with metals by the exclusion of oxygen.
Screw retention replaces traditional fastening methods such as cotters, lcok washers and discs. The screw retention secures screws and bolts against loosening due to vibration and vibrations and seals at the same time.
Even under the most extreme conditions, MARSTON-DOMSEL systems are reliable.

 

  • High strengths
  • High temperature resistance (up to 230°C)
  • time and cost savings
  • very short hardening times
  • high functional reliability
  • DVGW

 

Areas of application:

Motor racing, engine construction, the automotive and motorcycle industries, tractor construction, the electrical industry, turbines and nuclear power stations, engineering, the lighting industry, transmission construction, the foodstuffs industry, gas and waterworks, pump construction, sanitary applications etc.

 

User instructions:

Treat threaded parts with MD quick cleaner before applying screw retention adhesive. Pre-treat the surfaces with MD Activator No. 11 when working at temperatures below 5°C. Remove cutting oil and washing lye residues with hot water. Use MD MGL.BS or similar for plastic parts.

NEW!

Anaerobic in the 20 g soft bottle – extra soft bottle for effortless application

MD.MSS.520.290

low viscosity- high strength- difficult to disassemble
Max. thread: M6
Gap filling: 0,07 mm
Breakaway: 15 -25 Nm
Fixture time: 10 – 20 minutes
Curing time-functional: 1 – 3 hours
Temperature resistance: -55°C to + 150°C
color: green
For recommended for the retroactive securing of bolts and screws. Capillary effect

MD.MSS.541.241

low viscosity – medium strength – to disassemble
Max. thread: M12
Gap filling: 0,10 mm
Breakaway: 10 -15 Nm
Fixture time: 10-20 minutes
Curing time-functional: 1 – 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue

MD.MSS.550.222

low viscosity – low strength –  to disassemble
Max. thread: M24 | Gap filling: 0,10 mm
Breakaway: 4 – 8 Nm | Fixture time: 15 – 30 minutes
Curing time-functional: 1 – 3 hours | Temperature resistance: -55°C to + 150°C
color: purpur
Can be loosened again with normal tools. Suitable for adjusting screws, screws on maintenance openings and carburettor screws. For use on metals which may break during disassembly.

MD.MSS.581.242

Medium viscosity – medium strength- to disassemble
Max. thread: M24
Gap filling: 0,20 mm
Breakaway: 15 -25 Nm
Fixture time: 10-20 minutes
Curing time-functional: 1 – 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue

MD.MSS.585.243

DIN-DVGW-NG-5146AU7052 in accordance with DIN EN 751-1 Class H.

NSF Listed P1 (Reg. No. 154175)

high viscosity – medium strength – to disassemble
Max. thread: M36 | Gap filling: 0,25 mm
Breakaway: 17 -22 Nm | Fixture time: 10 – 20 minutes
Curing time-functional: 1 – 3 hours | Temperature resistance: -55°C to + 150°C
Color: dark blue

For all metal threaded connections. Prevents breaking off due to vibration on drives, motors etc. Slightly oil-tolerant. The bond can be loosened again with normal tools.

 

MD.MSS.5850K.2400

 without hazard and safety phrases! WRAS certificate 1701532

medium strength – high viscosity – to disassemble
For all screws with coarse threads up to M36 | Curing time-handling: 30-50 minutes
Curing time-functional: 6-12 hours| Gap filling: 0,25 mm
Viscosity: approx. 2.500 – 4.500 mPa.s | Temperature resistance: -55°C to +150°C
color: dark blue

MD.MSS.587.245

high viscosity – medium strength – difficult to disassemble
Max. thread: M80
Gap filling: 0,30 mm
Breakaway: 10 -15 Nm
Fixture time: 15-30 minutes
Curing time-functional: 1 – 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue

MD.MSS.641.270/1

NSF Listed P1 (Reg. No. 154682)

medium viscosity – high strength – difficult to disassemble
Max. thread: M20
gap-filling:    0,15 mm
breakaway:    15 -20 Nm
curing time handling:    15 – 30 minutes
curing time functional:    1 – 3 hours
temperatur resistance:    -55°C to + 150°C
Color: green
For all metal threaded connections including passive materials such as high-alloy steel. For highly vibration-and shock-resistant threaded connections e.g. studs on engines or pumps etc.

MD.MSS.6410.2700K

without hazard and safety phrases!

high strength – medium viscosity – difficult to disassemble
max. thread:    M20
gap-filling:    0,15 mm
breakaway:    20 – 30 Nm
curing time handling:    20 – 40 minutes
curing time functional:    6 – 12 hours
temperatur resistance:    -55°C to + 150°C
color: green

MD.MSS.642.272

DIN-DVGW-NG-5146AT7033 according to DIN EN 751-1 Class H.
NSF Listed P1 (Reg. No. 154683)

high viscosity – high strength – difficult to disassemble
Max. thread: M36
Gap filling: 0,30 mm
Breakaway: 20 -35 Nm
Fixture time: 20-40 minutes
Curing time-functional: 3 – 6 hours
Temperature resistance: -55°C to + 230°C
Color: red

MD.MSS.681.262

NSF Listed P1 (Reg. No. 154311)

high viscosity – high strength –  to disassemble
Max. thread: M36
Gap filling: 0,25 mm
Breakaway: 20 -25 Nm
Fixture time: 10-15 minutes
Curing time-functional: 1 – 3 hours
Temperature resistance: -55°C to + 150°C
Color: red

Packaging:

Content Unit Packaging
20 g 12 bottle /display
50 g 12 bottle /display
250 g 6 bottle
15 g 12 Pumpdispenser/display
50 g 12 Pumpdispenser/display
50 g 12 Tube
100 g 10 Tube
250 g 6 Tube